Level Gauges

This collection of Liquid level gauges are suitable for Marine application.

please note that this type of guages are suitable for fuel oils on board cargo,containers,passenger and defence ships.It gives extra protection for fuel spilling onboard and manufactured according to SOLAS requirement.

These are assembled with flat glasses with inner surfaces of reflecting prisms. Due to total internal reflection liquid level shows black in contrast to a mirror-like surface above. The gauges are used for services where observation is required at a distance and on low pressure boilers.

These gauges are constructed with a solid forged steel bar main chamber and cover plates recessed to have perfect alignment of gaskets and glass. Though rated for 2000 psig, these are light weight and hence do not need any cumbursome supports for medium lengths.-With special main chamber construction these gauges can be supplied upto,3000 psig at 100 F

• Illuminators : Non-Explosion proof or Explosion proof.
• Shields : Mica, Plastic or frost.
• Ex : 02-RC-NP is a level gauge with two sections each of 10" to make 20" overall length. Reflex type Main Chamber of carbon steel with non explosion proof illuminators and Plastic shield.
• Note : For higher temperature and pressure services each 14' section will be replaced by 2 Nos 7" sections

Glass

Teleflo Engineers’ continuous research, development and experimental studies on glass toughening and composition has made the tempered glasses used in these gauges most dependable providing a high strength resistant to both thermal and mechanical shocks and with the highest degree of visibility

These are assembled with two numbers of totally transparent toughened glasses to give a thorough vision of liquid levels. These gauges are recommended for interface levels, coloured fluids where colour is of interest to the process behaviour and services where excessive foaming may exist. In high pressure boilers these gauges are recommended to be used with mica shields.

Installation
Teleflo gauges are made in standard lengths and hence are easily interchangeable during installation. Gauges are available from 5’/2″ section length to 120″ section length. These gauges are available in a variety of connection combination to meet your installation requirements.

Where long lengths above 60″ are specified, special brackets welded to chamber can be supplied on request.